OLCT 200

RELIABLE

At OLDHAM, we understand the cost of equipment downtime and false alarms, so we ensure all of our products are designed with maximum reliability in mind.

  • SIL-2 – Hardware assessed to be SIL-2 capable
  • Security mode allows for lockout of critical parameters
  • "Fault Supervision" circuitry
  • Programmable warm-up and cal delays to avoid false alarms

VERSATILE

The OLCT 200 can be configured to meet nearly any application through its state-of-the art features and options.

  • Explosion-proof
  • Intrinsically Safe
  • HART® (opt)
  • RS-485 ModBus (opt)
  • Stainless Steel Enclosure (opt)
  • Programmable Relays (opt)
  • 2-wire, 3-wire Installations
  • Wireless Communication (opt)
  • Cold Climate Heater (opt)
  • Dual Gas Sensing (opt)
  • Remote Sensing (opt)
  • Large Sensor Offering—Electrochemical, Catalytic, Infrared, and Photo Ionization Detection Sensors

EASY TO USE

The OLCT 200 is designed to offer the user convenient features and ease of use.

  • Smart Sensors
  • Large Graphical Display
  • 30min Trending
  • Backlit LCD (excluding 2-wire)
  • Non-Intrusive Calibration
  • Split Screen Display (dual sensor option)
  • Visual Alarm LEDs

WIRELESS

Wireless communication is becoming increasingly popular in gas detection, and it is sometimes the only way to ensure safety in existing infrastructure or remote locations. The OLCT 200 wireless option offers many benefits to meet your application needs.

  • 900MHz or 2.4GHz FHSS
  • 10mW – 1W Adjustable Tx Power
  • CSA Div 1 and Div 2 Antennas
  • 256-bit Encryption
  • Indoor Range up to 3000' (900 meters)
  • Outdoor Range up to 10 miles (16 km)
  • High Receiver Sensitivity
  • Battery & Solar Powered Options

OLDHAM also offers a variety of wireless solutions compatible with the OLCT 200, including wireless controllers and solar-powered field monitors as well as wireless repeaters and accessories.

Technical Specifications

Sensors:

Combustible Gases: Catalytic, Infrared
Toxic / Oxygen: Electrochemical, PID

Material:

Enclosure: Epoxy Coated Aluminum or 316 Stainless Steel
Sensor: 316 Stainless Steel

Display:

Backlit LCD (2-Wire models do not have backlight

Input Voltage:

10 - 30 VDC
Lithium-Ion Battery (select wireless models)

Power Consumption:

25mA @ 24VDC (EC Sensor)
100mA @ 24VDC (Cat, IR, PID Sensors)
+120mA @ 24VDC (for added energized relays)
+20mA @ 24VDC (for added RS-485 ModBus)
+210mA @ 24VDC (for added Arctic Heaters)

Ingress Protection:

NEMA 7X, IP66

Cable:

2-wire, 3-wire, or 4-wire, shielded

Max. cable loop resistance:

500Ω @ 24VDC (2-wire configs)
750Ω @ 24VDC (3-wire configs)

Output Signal:

Standard: 4-20mA (analog), 2-wire (sink), 3-wire (source)
Optional 1: Dual Isolated 4-20mA (source)
Optional 2: RS-485 ModBus (9600 Baud)
Optional 3: Wireless (900MHz or 2.4 GHz)
Optional 4: HART® Protocol

Alarm Relays (opt):

3 Relays (2 User Programmable, 1 Fault)
Form C (SPDT)
5 AMP @ 30VDC or 240 VAC "RESISTIVE"
Relays 1&2 are configurable for low and high alarms, normally energized or normally de-energized, and latching or non-latching
Fault Relay is always normally energized

Wireless (opt):

900MHz or 2.4GHz FHSS(Frequency Hopping Spread Spectrum)
256-bit AES Encryption (meets FIPS-197)
10mW - 1W Adjustable Transit Power (900Mhz only)
Div 1 XP and Div 2 Configurable

Approvals:

Consult factory for current approval status
CSA - Class 1, Div. 1, 2 - Groups A, B, C, D (2-wire config.) - Groups B, C, D (3-wire config.)
IS barrier required for intrinsically safe installations!
SIL-2 - hardware SIL-2 capable per EN 61508 (exida)

Dimensions:

5.0" (127mm) W x 7.8" (197mm) H x 5.1" (130mm) D Shipping Weight Appox. 7 Lb (3.2 kg)

Operating Temperature:

-40°C to 60°C - (sensor specific)

CSA US
DNV Certification
HART Protocol
SIL 2