The Ventis MX4 gas detector is configured for your safety.
The Ventis MX4 takes your gas detection program to the next level.

  • Monitors 1-4 gases
  • Configures with or without a pump
  • Available with a black or safety orange overmold
  • iNet™ Ready and DS2 compatible
  • Detect from one to four gases with a wide range of sensor options
  • Draw samples from up to 100 feet with an optional, integrated sampling pump
  • Gain increased instrument visibility with a safety orange overmold
  • Realize true portability with multi-gas protection in single-gas size
  • Use the extended range battery for up to 20 hours (without pump)
  • Discover a better way to do gas detection with the Ventis on iNet

SPECIFICATIONS

INSTRUMENT WARRANTY:

Two- year warranty, including sensors and battery

CASE MATERIALS:

Polycarbonate w/ protective rubber overmold

DIMENSIONS:

103 mm x 58 mm x 30 mm (4.1” x 2.3” x 1.2”) - Ventis lithium-ion battery
version

172 mm x 67 mm x 66 mm (6.8” x 2.6” x 2.6”) - Ventis with pump
lithium-ion battery version

WEIGHT:

182 g (6.4 oz) - Ventis, lithium-ion battery version

380 g (13.4 oz) - Ventis with Pump, lithium-ion battery version

Operating TEMPERATURE RANGE:

-20°C- 50°C (-4°F-122°F)

OPERATING HUMIDITY RANGE:

15%-95% Non-condensing (continuous)

DISPLAY:

Backlit Liquid Crystal Display (LCD)

POWER SOURCE/RUN TIME:

Rechargeable lithium-ion battery pack
   (12 hours typical @ 20ºC) - Ventis

Rechargeable extended-range lithium-ion battery pack
   (20 hours typical @ 20ºC) - Ventis 
   (12 hours typical @ 20ºC) - Ventis with pump

Replaceable AAA alkaline battery pack
   (8 hours typical @ 20ºC) - Ventis
   (4 hours typical @ 20ºC) - Ventis with pump

ALARMS:

Ultra-bright LEDs, loud audible alarm (95 dB at 30 cm), and vibrating alarm

SENSORS:

Combustible gases/methane - Catalytic Diffusion

O2, CO, H2S, NO2, SO2 - Electrochemical

SENSOR MEASURING RANGES:

Combustible Gases: 0-100% LEL in 1% increments

Methane (CH4): 0-5% of vol. in 0.01% increments

Oxygen (O2): 0-30% of vol. in 0.1% increments

Carbon monoxide (CO): 0-1,000 ppm in 1 ppm increments

Hydrogen sulfide (H2S): 0-500 ppm in 0.1 ppm increments

Nitrogen dioxide (NO2): 0-150 ppm in 0.1 ppm increments

Sulfur dioxide (SO2): 0-150 ppm in 0.1 ppm increments

CERTIFICATIONS:

UL:

Class I, Division 1, Groups A B C D, T4; Zone 0, AEx ia IIC T4

Class II, Groups F G (Carbonaceous & Grain dust);

IP66; IP67

ATEX:

Ex ia IIC T4 Ga and Ex ia I Ma;

Equipment Group and Category II 1G and I M1; IP66; IP67

IECEx:

Ex ia IIC T4 Ga; IP66; IP67

CSA:

Class I, Division 1, Groups A B C D, T4; Ex d ia IIC T4
C22.2 No. 152 for %LEL reading only

ANZEx:

Ex ia s Zone 0 I/IIC T4; IP66; IP67

INMETRO:

Ex d ia IIC T4 Gb; IP66; IP67

KOSHA:

Ex d ia IIC T4

MSHA:

30 CFR Part 22; Permissible for underground mines; Li-ion versions only

PA-DEP:

Permissible for PA Bituminous Underground Mines

China Ex:

Ex ia d IIC T4 Gb

China CMC:

Metrology approval

China MA:

Approved for underground mines; diffusion (without pump)
standard Alkaline version only

GOST- K:

PBExdiaI X / 1ExdiaIICT4 X

GOST-R:

PBExdiaI X / 1ExdiaIICT4 X

These specifications are based on performance averages and may vary by instrument.