Manufacturer:
|
OLDHAM SA
|
Type:
|
MX52
|
Function:
|
Controller Safety Instrumented System
|
Capacity:
|
8 cards, 2 independent channels each (max 16 channels)
|
Display:
|
Fluorescent 2 lines 16 fixed or scrolling characters
|
Alarms
|
Fault Alarms:
|
Specific channel identification with yellow LED
Common fault relay
|
Gas Alarms:
|
3 independent thresholds per channel
Third threshold on delay or average
Automatic or manual reset
Programmable increasing or decreasing alarm
Visual red LED
|
Audible Alarms:
|
Follows the fault sequence and panel acknowledgement gas alarm
|
Outputs:
|
2 independent gas alarm relays per channel (2 A - 250 VAC rating for resistive load)
1 common alarm 3 relay
1 common fault relay
Energized or de-energized alarm relays
Energized fault relay
Programmable NC or NO on alarm 1, alarm 2 and fault alarm, SPDT on alarm 3
|
Inputs
|
Type of detectors:
|
Flammable catalytic bridge type - 3 wires
Oxygen, toxic or flammable analog transmitters, 2 or 3 wires
Other 4-20 mA analog output transmitters
|
Wiring:
|
2 or 3 wires shielded cable
|
Loop impedance:
|
Flammable 3 wires: 32 Ω
4-20mA; 2 or 3 wires: 56 Ω
Average line length (in meters at 20°C, core size 1,5 mm2): Flammable: Bridge type - 1000 m 4-20 mA - 2000 m
|
Signal Output:
|
4-20 mA per channel
Serial RS 485 or 232 MODBUS protocol
|
Power supply:
|
103 to 122 Vac or 207 to 244 Vac
21 to 31 VDC
Power consumption: 300 VA or 240 W
|
Miscellaneous:
|
Local or remote acknowledgement
Operating temperature: -10 +45°C
Relative humidity: 5 to 95% non condensing
|
Dimensions:
|
Rack 3U, 19” frame
Dimensions:482 w x 132 h x 266 d in mm
|
Weight:
|
15 Kgs
|
Approvals
|
|
Compliant with European standards EN 50054, EN 50057, EN 50104 and EN 50271 (harmonized standards 61779-1: 2000 and 61779-4: 2000)
ATEX II(2)G
SIL 2 capability according to EN 61511 (INERIS n° 68210-2005)
EMC Directive EN 50081-1-2 and EN 50082-1-2
Low voltage directive EN 61010-1
|